N
NJHTools

Mic Test

Test your microphone online in seconds: press Start, speak, and the live dB meter and verdict tell you whether your mic is working, too quiet or clipping. Then record a clip to hear yourself. Your audio never leaves your device.

Your audio never leaves your device. The test runs in your browser, nothing is uploaded, and a test recording exists only on this page until you download it or close the tab.

Press Start to begin the mic test.

Visualizer

Record and play back

Record a short clip to hear exactly how you sound to others. Start the mic test first.

How to test your microphone

  1. Start the test. Click Start mic test and allow microphone access when the browser asks. Nothing starts until you click.
  2. Pick your microphone. Choose the microphone you want to check from the list. The test switches to it immediately.
  3. Speak and watch the meter. Talk at a normal volume. The level meter, waveform and verdict show whether the mic is working, too quiet, silent or clipping.
  4. Record and play back. Record a 5 or 10 second clip and play it back to hear how you sound. Download it if you want to keep it.
  5. Stop the test. Click Stop test. The microphone is released and the browser's recording indicator turns off.

Reading the results

  • Level (RMS) is the average loudness. Normal speech lands around -30 to -15 dBFS.
  • Peak is the loudest sample, held briefly. Peaks at 0 dBFS mean the signal is clipping.
  • No signal means the browser gets digital silence, usually a muted or wrong input.
  • Too quiet while you talk means the input gain is low or you are far from the mic.
  • Echo cancellation, noise suppression and auto gain are turned off, so you hear the raw mic. Video-call apps usually turn them on, so you may sound cleaner (and a bit louder) there.

Mic not working? Quick fixes

  • Check for a mute switch on the headset or a mic-mute key on the laptop keyboard.
  • Close apps that may hold the mic, such as Zoom, Teams or Discord, and try again.
  • Windows:Settings > Privacy & security > Microphone must allow desktop apps, and Settings > System > Sound > Input sets the default mic and its volume.
  • Mac:System Settings > Privacy & Security > Microphone must list your browser, and System Settings > Sound > Input sets the input volume.
  • Bluetooth headsets often switch to a lower-quality call mode while the mic is in use. That is normal.

Frequently Asked Questions

How do I test my mic?↓

Click Start mic test, allow access, and speak. If the level meter moves and the verdict says your mic is working, the browser receives sound from it. Then record a 5-second clip and play it back to hear the quality.

Why does the mic test show no sound?↓

If the verdict says No signal, the browser receives pure silence: the mic is muted by a hardware switch or key, the wrong input is selected, or the system input volume is at zero. Pick another device in the list, and check Settings > System > Sound > Input on Windows or System Settings > Sound > Input on Mac.

Is my audio recorded or uploaded?↓

No. The test runs entirely in your browser and your audio never leaves your device. A clip is only recorded when you press Record clip, it stays on the page until you download it, and it is discarded when you close the tab.

What is a good microphone level in dB?↓

For speech, an RMS level around -30 to -15 dBFS with peaks below -6 dBFS is healthy. Below about -50 dBFS while talking is too quiet. Peaks touching 0 dBFS mean clipping, which distorts the sound.

How do I allow microphone access if I blocked it?↓

In Chrome or Edge, click the site controls icon left of the address bar and set Microphone to Allow, then reload. In Safari, use Safari > Settings for This Website. Also check Windows Settings > Privacy & security > Microphone, or macOS System Settings > Privacy & Security > Microphone.

Related Tools

All Audio Tools →

Last updated: